Richter magnitude scale Developed in 1935 by Charles Richter in collaboration with Beno Gutenberg, both of the California Institute of Technology, the Richter scale assigns a single number to quantify the size of an earthquake. It is more correctly called the ML Scale (for local magnitude). Richter's local magnitude scale was originally intended to be used only in a particular study area in California, and on seismograms recorded on a particular instrument, the Wood-Anderson torsion seismometer. Richter magnitude is a base-10 logarithmic scale obtained by calculating the logarithm of the combined horizontal amplitude of the largest displacement from zero on a seismogram. The diminution of amplitude due to distance between the earthquake epicenter and the seismometer is corrected for by subtracting the logarithm of the expected amplitude of a magnitude 0 event at that distance. This correction for distance is intended to make the local magnitude an absolute measure of earthquake size. Richter originally reported values to the nearest quarter of a unit but later, decimal numbers were used. Richter's motivation for creating the local magnitude scale was to separate the vastly larger number of smaller earthquakes from the relatively fewer larger earthquakes observed in California at the time. His inspiration for the technique was the stellar magnitude scale used in astronomy to describe the brightness of stars and other celestial objects. Richter arbitrarily chose a magnitude 0 event to be an earthquake that would show a maximum combined horizontal displacement of 1 micrometre on a seismogram recorded using a Wood-Anderson torsion seismometer located 100 km from the earthquake epicenter. This choice was made to prevent negative magnitudes from being assigned. However, the Richter scale has no upper or lower limit. Sensitive modern seismographs now routinely record quakes with negative magnitudes. Because of the limitations of the Wood-Anderson torsion seismometer used to develop the scale, the original ML cannot be calculated for events larger than about 6.8. Many investigators have proposed extensions to the local magnitude scale, the most popular being the surface wave magnitude MS and the body wave magnitude Mb. The major problem with Richter magnitude is that it is not easily related to physical characteristics of the earthquake source. Furthermore, there is a saturation effect at near 8.3-8.5, owing to the scaling law of earthquake spectra, that causes traditional magnitude methods (such as MS) to yield the same magnitude estimate for events that are clearly of different size. By the beginning of the 21st century, most seismologists considered the traditional magnitude scales to be largely obsolete, being replaced by a more physically meaningful measurement called the seismic moment which is more directly relatable to the physical parameters, such as the dimension of the earthquake rupture, and the energy released from the earthquake. In 1979 seismologist Hiroo Kanamori, also of the California Institute of Technology, proposed the Moment Magnitude Scale (MW), which provides a way of expressing seismic moments in a form that can be approximately related to traditional seismic magnitude measurements. Magnitude must not be confused with intensity. Intensity scales, such as the Rossi-Forel and Modified Mercalli Intensity Scale, are used to describe relative earthquake effects. Intensity is sensitive to a host of local site conditions and is not an absolute measurements of earthquake size. Events with magnitudes of about 4.5 or greater are strong enough to be recorded by seismographs all over the world. The following describes the typical effects of earthquakes of various magnitudes near the epicenter. This table should be taken with extreme caution, since intensity and thus ground effects depend not only on the magnitude, but also on the distance to the epicenter, and geological conditions (certain terrains can amplify seismic signals). Descriptor Richter Magnitudes Earthquake Effects Average Annually Micro Less than 2.0 Microearthquakes, not felt. About 8,000 per day Very minor 2.0-2.9 Generally not felt, but recorded. About 1,000 per day Minor 3.0-3.9 Often felt, but rarely causes damage. 49,000 (estimated) Light 4.0-4.9 Noticeable shaking of indoor items, rattling noises. Significant damage unlikely. 6,200 (estimated) Moderate 5.0-5.9 Can cause major damage to poorly constructed buildings over small regions. At most slight damage to well-designed buildings. 800 Strong 6.0-6.9 Can be destructive in areas up to about 100 miles across in populated areas. 120 Major 7.0-7.9 Can cause serious damage over larger areas. 18 Great 8.0 or greater Can cause serious damage in areas several hundred miles across. 1 (Adapted from U.S. Geological Survey documents.) Great earthquakes occur once a year, on average. The largest recorded earthquake was Great Chilean Earthquake of May 22, 1960 which had a magnitude (MW) of 9.5 (Chile 1960). See also: List of earthquakes simple:Richter scale Most Popular Articles: Music    Musical Instruments    Guitar    Classical Music    History    Music Definition    Country Music    Rock Music    Pop Music    Hip Hop    Rap    DJ    Video Games    Casino Games    Poker    Blackjack    Casinos    Real Estate    Loan    Auction    eBay    Marketing    Search Engine Optimization    File Sharing    MP3    Music Industry    Kazaa    Internet    Supermodel    Fashion    Fashion Designers    Erotica    Modeling    Clothing    Boots    Shoes    Diamond Engagement Rings    Diamond    Rugs    Gospel Music    Affiliate    E-Commerce    Radio This article is licensed under the GNU Free Documentation License at http://www.gnu.org/copyleft/fdl.html You may copy and modify it as long as the entire work (including additions) remains under this license. You must provide a link to http://www.gnu.org/copyleft/fdl.html To view or edit this article at Wikipedia go to http://www.wikipedia.org/wiki/Richter_magnitude_scale